18
>>>
GENERAL OPERATION
> D
> GB
> F
> I
> E
> P
> NL
> DK
> S
> N
> FIN
> TR
> GR
> PL
> CZ
> H
> SK
Connection to the mains outlet
Connecting power supply
Connection to the public mains grid is
achieved using the optionally available
mains power supply unit. Please proceed
as follows to connect to the mains:
>
Open the cover on the left side of the
unit of the Traffic Assist.
>
Hold the USB connector at the corru-
gated grip area and push it into the con-
necting socket of the Traffic Assist as far
as the stop without employing excessive
force.
>
Insert the plug of the power supply unit
into the socket.
GPS-antenna
Unit antenna
The GPS antenna is integrated into the
housing.
Connecting up external
antenna
To enable reception under adverse recep-
tion conditions, an external GPS antenna
can be connected (not included). For this
purpose, a closable connecting socket is
located on the rear of the housing. If no
external antenna is connected, this con-
nection must always be closed again.
>
Open the closure by pulling gently on
its upper surface.
>
Connect the external antenna using the
optionally available adapter.
!
Danger!
Ensure that you do not have wet hands
and that the power supply unit is dry.
Only connect the power supply unit to
a permissible mains power supply.
Note:
Remove the power supply unit when not
using the Traffic Assist for longer periods
of time.
Note:
The integrated GPS antenna is not suita-
ble for use in vehicles with anti-glare win-
dows (metalised thermo-glass or metal
foil, indicated by the window label - SIG-
LA SOL, SIGLA CHROM, SIGLA,
KOOL-OF, SUNGATE, etc.) and vehi-
cles with fine-meshed heating wires in
the windows.
If this is the case, use an external GPS an-
tenna. Please consult your local specialist
dealer.
Summary of Contents for Traffic Assist Z 102
Page 1: ...Operating instructions ...
