BCDVideo BCD221 User Manual Download Page 106

Page: 106 / 157

10.

Connect the SID module cable to the front power/USB 3.0 connector.

11.

Install the fan cage.

12. Install the air baffle

13. Install the access panel

14.

Slide the server into the rack.

15.

Connect each power cord to the server.

16.

Connect each power cord to the power source.

17. Power up the server

The installation is complete.

Installing a FlexibleLOM adapter

Prerequisites

• The components included with the hardware option kit
• A T-10 Torx screwdriver might be needed to unlock the access panel.

Procedure

Power down the server

Do one of the following:

• Disconnect each power cord from the power source.
• Disconnect each power cord from the server.

Do one of the following:

•

Extend the server from the rack

•

Remove the server from the rack

Remove the access panel

Remove the primary riser cage

Remove the FlexibleLOM blank.

106

Installing a FlexibleLOM adapter

Summary of Contents for BCD221






























































































































































Search results

Summary of Contents for BCD221

Reviews:

Related manuals for BCD221

Brands by name

Popular brands

BCDVideo BCD221, User Manual

Search results

Summary of Contents for BCD221

Reviews:

Related manuals for BCD221

Brands by name

Popular brands