BC Biomedical DA-2006, Service Manual, Page: 64 / 171

57
The DA-2006P can analyze pacemaker pulses as well as determine Refractory periods and
Sensitivity levels of on-demand pacemakers. For maximum versatility, the DA-2006P has
26 internally selectable pacemaker loads ranging from 50 ohms to 2300 ohms. The
DA-2006P can also test the noise immunity of the DUT by generating a 50 or 60 Hz noise
waveform with amplitude up to 100 mV. For sensitivity testing, the DA-2006P can output
a Square, Triangle or Haversine waveform with widths ranging from 10ms to 200ms. The
input circuitry of the DA-2006P is protected against damage in the case of an accidental
defibrillator discharge into the Pacemaker Input terminals.
The key is used to change to the Pacemaker Analyzer mode.
The Pacemaker Analyzer MAIN SCREEN shows the current CONFIGURATION, the TEST
RESULTS and the available FUNCTION KEYS.
The following is a sample of the PACE MAIN SCREEN:
NOTE: The Test Results section of the PACE MAIN SCREEN contains eight lines of data
that can be toggled to view the first 4 lines or the second 4 lines (See TEST RESULTS
section of manual for more information).
TRANSCUTANEOUS PACEMAKER ANALYZER
PACE MAIN SCREEN