BAYKAL
EDITION NO :
APH
SECTION :
DATE OF ISSUE :
July-2005
PAGE :
66
Figure 6.5.7.6
2.
Pull out the bottom tool
(See Figure 6.5.7.5)
from any side.
3.
Put on the new tool on the bed by means of lifting equipment (If you use
sectional type of tools, by hand). Place the new bottom tool from any
side.
4.
Tighten up the fixing bolts along the bed.
Type 3.
Changing the bottom tool:
The bottom tool is fixed in its place as seen in
Figure 6.5.7.7
below.
In order to change the bottom tool, proceed the followings;
1.
Loosen up the hand screws in both sides of the machine.
2.
Remove the bottom tool using lifting equipment.
3.
Put on the new tool on the bed by means of a lifting equipment
4.
Tighten up the hand screws
FIXING BOLTS
BOTTOM
Summary of Contents for APH Series
