BAYKAL
EDITION NO :
APH
SECTION :
DATE OF ISSUE :
July-2005
PAGE :
23
6.5. Using the press brake
6.5.1. Requirements for the initial test and examination
•
Check the machine visually against any transport damage.
•
Clean the oil tank.
•
Fill the oil tank up to the level indicator with one of the oil types recommended
in the Lubrication Diagram. (See section 7.)
•
Check that the side and rear guards are functioning mechanically in proper.
•
Check that the top tool is rigidly fixed in its place.
•
Check that the bottom tool is properly placed with respect to the top tool.
•
Make sure that the cables are not damaged.
•
Check the components and terminal ends inside the electrical cabinet against any
loosening.
•
Make sure that switches and buttons are not damaged.
•
Carry out the electrical connections according to section 6.5.2. and then proceed
with initial testing and start-up according to instructions in section 6.5.1. and
6.5.3.
•
Check by means of a test-run that :
a.
All switches and buttons are fulfilling their functions. (In particular,
emergency, buttons, safety and limit switches).
b.
There is no oil leakage in cylinders, valves, pipes and hoses.
Summary of Contents for APH Series
