BAYKAL
EDITION NO :
APH
SECTION :
DATE OF ISSUE :
July-2005
PAGE :
22
6.4. Incorrect uses of the press brake
During normal operation of the press brake, the following incorrect uses must be
avoided. The likely consequences of such incorrect uses are also explained
below :
Incorrect use ( 1 ) :
Top tool not centered on the bottom tool
″
V
″
Consequence :
•
No bending at desired angle.
•
Oil leakage in cylinder.
•
Damage to tooling, breaking of tooling with possible
injury to operator.
•
Breaking of stud connecting piston to beam.
Incorrect use ( 2 ) :
Bending flame-cut material.
Consequence :
•
Damage to tools, spread of chips from workpiece with
possible injury to operator.
Incorrect use ( 3 ) :
During machine operation or adjustment, foreign substances
(e.g. nuts, bolts, wrenches and similar tools) lying in between
bending tools.
Consequence :
•
Damage to bending tools, foreign substances breaking
out with possible injury to operator.
Summary of Contents for APH Series
