BAYKAL
EDITION NO :
APH
SECTION :
DATE OF ISSUE :
July-2005
PAGE :
70
Figure 6.5.8.4
1.
Identity the location the work table where the bending angle is different.
2.
Pull forward the conical wedges (B) by means of (A) bolts to the extent of
deformation. The deformed section of work table is thus pushed up.
3.
The same adjustment should be done on other sections of work table where
angle differences are noticed
.
* If the machine is not equipped with
Wila crowning device
Summary of Contents for APH Series
