BAYKAL
EDITION NO :
APH
SECTION :
DATE OF ISSUE :
July-2005
PAGE :
42
4.
Enter the bending angle
(See Figure 6.5.3.14)
in Y axis window (Y
value) using numerical keys.
Figure 6.5.3.13
Figure 6.5.3.14
5.
Press start key on the controller.
(See Figure 6.5.3.15)
Thus the back
gauge will move to its final position and the motor with reducer behind
the top beam will adjust the angle value.
Figure 6.5.3.15
Note:
Y value is in millimeters. Because of using different types of tools and
limitations in Elgo controller, it is impossible to design angle scale in
degree. Therefore the user should design a millimeter scale for angle
according to different types of tools.
Summary of Contents for APH Series
