BAYKAL
EDITION NO :
APH
SECTION :
DATE OF ISSUE :
July-2005
PAGE :
64
In order to change the die holder;
After removing the bottom tool,
1.
Loosen up the hand screws in both sides of the machine.
2.
Change the die holder with a new one.
3.
Tighten up the hand screws.
Type 2.
a. Changing the top tool:
The top tool is fixed in its place as seen in
Figure 6.5.7.4
below.
Figure 6.5.7.4
!
There is danger of top tool falling free if the tool fixing bolts are let loose
excessively and also danger of top tool and adaptors assembly falling free if the
adaptors fixing bolts are let loose.
CHECK
the bolts against any loosening
periodically.
TOP TOOL
BOTTOM
TOP TOOL
LATCH
ADAPTER FIXING BOLTS
PULLING OUT THE
TOOL
INSERTING THE
TOOL
Summary of Contents for APH Series
