manualshive.com logo in svg

Bay Networks Marlin, Reference Manual

Share
Download
Bay Networks Marlin Reference Manual Download Page 25

T

UTORIAL

2-4

2.3 L

OCAL 

B

RIDGES

Local Bridges are used to connect two or more LAN segments together to
form a larger LAN.  If a network is split into segments, then fewer stations
will need network bandwidth at the same time, so reducing waiting times.

The stations in Figure 2-1 are connected as one LAN. They can be
connected as a number of separate LAN segments instead, using a local
bridge as shown in Figure 2-2.

LAN A

LAN B

LAN C

Local Bridge

Host X

Host Y

Workstation A

Workstation B

Workstation C

Figure 2-2       Local Bridging

Splitting the LAN into three segments can triple the network bandwidth,
which improves network performance by reducing transmission times and
increasing overall throughput.  The total improvement depends on how
much data passes between segments.  Fewer or more LAN segments may be
used, depending on what the network must do.

Any frames for stations on the same segment (such as between Workstation
A and Host X on LAN A) need not be sent to the other segments, as they are
of no use to them.  Therefore access to LAN C for Workstation C (say) is
not affected by activity on or between LAN A and LAN B.  The local bridge
ensures that only inter-segment frames are passed from a source segment to
its destination segment, while frames between stations on the same segment
are not sent to other segments.

Summary of Contents for Marlin


























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands