Bay Networks Marlin Reference Manual Download Page 168

Page: 168 / 185

EFERENCE

5-75

5.6.2.1

Link Spanning Tree Status

N.MAR.mmm SYSTEM NAME LINK SPANNING TREE STATS
________________________________________________________________________________

Link No. :1 Designated Root :000000000000 (Pri 0)

Priority :0 Designated Cost :0

State :forwarding Designated Bridge:000000000000 (Pri 0)

Enabled :enabled Designated Link :1 (Pri 255)

Path Cost :15625 Fwd Transitions :0

________________________________________________________________________________
^G - Main Menu
^L - Prev Menu
________________________________________________________________________________
(st br stp) Enter command :

Figure 5.32 Link Spanning Tree Status Screen

Link No.

Link number (generated automatically).

Priority

Priority of this link.

State

State of the link (forwarding, disabled, etc.)

Enabled

Shows the actual state of the link. This will normally be
enabled, and only disabled if the link goes out of
service, for example.

Path Cost

Cost of the link, derived from the line speed configured
for the port.

Designated Root

MAC address of the bridge acting as the root bridge in
the network.

Designated Cost

Total cost of the path to the root bridge.

Summary of Contents for Marlin


























































































































































































Search results

Summary of Contents for Marlin

Reviews:

Brands by name

Popular brands

Bay Networks Marlin, Reference Manual

Search results

Summary of Contents for Marlin

Reviews:

Brands by name

Popular brands