manualshive.com logo in svg

Bay Networks Marlin, Reference Manual

Share
Download
Bay Networks Marlin Reference Manual Download Page 180

U

TILITIES

6-3

 Press Space Bar to return to menu
 ( 0,    8, 22570002)  ISDN_REQ: Retransmit Request for 123456
 ( 0,    9, 22570003)  ISDN_REQ: Sending Request for 123456
 ( 0,   10, 22570004)  ISDN_PORT: ISDN2 sent ATS27=4
 ( 0,   11, 22570005)  ISDN_PORT: ISDN2 sent ATD 123456
 ( 0,   12, 22570086)  ISDN_PORT: ISDN2 response : OK
 ( 0,   13, 22570087)  ISDN_PORT: ISDN2 response : OK
 ( 0,   14, 22572033)  ISDN_PORT: ISDN2 DISC Reason 17

Figure 6.1  Trace Window Screen (Example)

In the above example, the Marlin Bridge tries to make an ISDN call to
number 123456, but the call fails due to reason 17 (User Busy).

The second column in the Trace Window is the Trace Record number.  If
the numbers are not in unbroken sequence, then some Trace messages have
been lost due to the Marlin Bridge being too busy.  The third column is a
time stamp (number of milliseconds since the Marlin Bridge was last
rebooted).

Only one Manager can have the Trace Window open at any one time.

Note: when disconnecting from the Manager, make sure that the Trace
Window is not still active.  This is especially important for a remotely
accessed Trace Window, as the bridge will attempt to forward the Trace
Window packets to the unit from which it was originally accessed.

Summary of Contents for Marlin


























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands