16. FINAL REVIEW
!
Recheck the pilot ignition and operation of the fire through the range of settings.
!
Visually inspect the appliance. Clean off any marks incurred during installation.
!
Advise the customer to read their owner guide before operating the fire and to
always follow the advice in the section headed “Cleaning Your Fire”.
!
Stress that no loose ceramic fuel effect pieces must be added to the ceramic fuel
effect supplied with the appliance and that any replacement ceramic fuel effect
must only be the authorised spare.
!
Advise the customer how to operate the appliance. Take the customer through the
full operating sequence step by step. Point out that lighting instruction details are
contained on the plate attached at the bottom of the appliance. Leave the plate visible in
front of the bottom front cover as a reminder to the customer.
!
Advise the customer that the pilot flame can be viewed to ensure that it is alight.
Show the user where to view the pilot and point out the illustration in the owner guide
showing how to view the pilot.
!
Advise the customer that the pilot can be left alight but mention that if the premises
are to be left unoccupied for a lengthy period, it is advisable to turn the pilot off.
!
Emphasise that if the glass panel is broken or damaged, the fire should be
turned off and not used until the window unit is refitted with an authorised
replacement.
!
Recommend that the appliance should be serviced by a competent person (In the UK
preferably a CORGI registered person) at least annually.
If the appliance is in premises
in the United Kingdom occupied by a tenant, point out that by law a landlord must have
any gas appliance, flue and pipework which is situated in a tenant’s premises checked
for safety at least every 12 months.
!
Hand the literature pack with this guide to the customer.
Page 32
INSTALLER GUIDE
©
Baxi Heating U.K. Limited 2007.
