- 51 -
•
Any modification of the device must be authorized and performed by the authorized
professional technical personnel.
•
It is forbidden to make any modifications in wiring of the device.
•
In case not following the safety instructions above the device safety may become
limited.
The device fulfils the requirements of the low-voltage directive 2006/95/EC.
Moreover the device conforms to the following regulations regarding the electric
installations:
• EN 60335 general part;
• EN 60335-2-42;
The device fulfils the requirements of the electromagnetic compatibility directive
2004/108/EC.
5.2 Setup
•
In the beginning make sure that there are no elements blocking the way to the
installation place through the doors, corridors or other communication routes.
•
CAUTION: The device may overturn during transport, which may damage the device
itself, other objects or cause the injuries. Use the means appropriate for the device
weight. The device should not be dragged or tilted, but lifted perpendicularly to the
ground and handled in the horizontal direction.
•
Before positioning the device check the dimensions and exact positions of the
electric, water, and extraction connections.
•
The device must be positioned in a room with sufficient ventilation (not outdoors) in
order to avoid excessive concentration of harmful substances in the air.
•
We recommend to position the device under the hood or to remove hot vapours and
odours from the device chamber outside.
•
Remove the external package (wooden crate and/or carton box) and utilize it
according to the regulations valid in the country of installation.
•
Check the device for damages and position it in the operation place.
•
Never position the device in the vicinity of the flammable materials or containers with
such materials (walls, furniture, partition walls, gas cylinders) as it may cause the fire
hazard. When it is not possible, insulate such materials with use of non-flammable heat
insulation, following all fire protection regulations.
