Conair GMT235CSV, Instruction Booklet

Page: 1 / 2

Important Safety
InStructIonS
When using electrical appliances, especially
when children are present, basic safety precau-
tions should always be taken, including the
following:
read all InStructIonS
before uSIng
Keep away
from water
danger–
A
ny appliance is electrically
live, even when the switch is off.
To reduce the risk of death or injury by
electric shock:
1. Always unplug appliance from electrical outlet
immediately after using (except when charging
unit).
2. Do not place or store appliance where it could fall
or be pulled into a tub or sink.
3. Do not use appliance while bathing or in the
shower.
4. Do not place appliance in, or drop into, water or
other liquid.
5. If appliance has fallen into water, do not reach for
it. Unplug immediately.
6. Unplug this appliance before cleaning.
do not reach
Into the water
warnIng–
To reduce the risk of
burns, electric shock, fire, or injury to persons:
1. Never leave a plugged-in appliance
unattended.
2. This appliance should not be used by, on or
near children or individuals with certain dis-
abilities.
3. Use appliance only for its intended use as
described in this manual. Only use attach-
ments recommended by the manufacturer.
Do not use an extension cord to operate the
appliance.
4. Never operate the appliance if it has a damaged
cord or plug, is not working properly, has been
dropped or damaged, or dropped into water.
Return the appliance to a Conair service center
for examination and repair.
5. Keep the appliance cord away from heated
surfaces.
6. Do not pull, twist or wrap the cord around the
appliance.
7. Never drop or insert any object into any open-
ing of the appliance.
8. Do not place the appliance on any surface while
it is operating.
9. Do not use the appliance with a damaged or
broken comb or with teeth missing from the
blades, as injury may result. Before each use,
make certain the blades are aligned properly
and oiled.
10. Do not use the appliance outdoors or where
aerosol (spray) products are being used or
oxygen is being administered.
11. thIS product IS for houSehold uSe
only.
Save theSe
InStructIonS
troubleShootIng
If your cord/cordless, rechargeable trimmer does
not seem to be taking a charge, take the following
troubleshooting steps before returning it for repair:
1. Be sure the electrical outlet is working by plugging in
another appliance to test it.
2. Make sure the electrical plug is not connected to a
switch which turns power off when lights are turned
off.
3. Be sure you have inserted the trimmer properly into
the charging stand, that all connections are secure, and
that the trimmer switch is in the “OFF” position.
operatIng InStructIonS:
1. Before using your trimmer for the first time, insert
the cord into the trimmer through the hole in base, then
place trimmer in base and charge it for 16 hours. Always
place the trimmer in the stand with the ON/OFF switch
in the OFF position.
2. Always check to see if the charging light is on when
the cord is connected to the trimmer and the unit is not
in use.
3. Plug unit into any wall outlet (at the voltage listed on
the label affixed to the adapter).
4. The trimmer can remain plugged into the power
source at all times without damage to the battery.
5. If, while using the trimmer without the cord, the
charge seems to be running down, simply put ON/OFF
switch in OFF position. Then, insert cord into the trimmer
and plug into wall outlet. Switch to ON position and use
as a corded trimmer.
6. The battery life can be improved by periodically allow-
ing the trimmer to run until the motor stops. Immediately
shut the switch OFF and fully recharge.
7. The adapter may become warm while charging
— this is normal.
8. Using on the mains (wall outlet) — plug the clipper
into the mains (wall outlet), then turn on the clipper. (If
the battery is very weak, wait about 2 minutes).
uSer maIntenance
InStructIonS
takIng care of your trImmer
oIlIng the bladeS
About once a month you should oil the trimmer
blades with the oil provided in your kit. It is best to
do this over a piece of newspaper. Turn the trimmer
on and hold it so that the blades are pointed down-
ward. Spread one drop of oil across the blades, then
turn the trimmer off and wipe away the excess oil
with a soft cloth.
Be careful not to use too much oil and don’t oil
your trimmer more than necessary, as that could
damage the motor. (Never attempt to oil the motor
bearing, as it is permanently lubricated.) After oiling
the blades, return the trimmer and oil packet to the
trimmer storage base. Keep oil away from children.
blade care
Because the trimmer blades are precision-made for a
very special use, they should always be handled with
care. Each time you finish using the trimmer, take the
cleaning brush provided and brush away any loose
hair that has collected in the blades. Then store the
trimmer in its recharging storage base to protect the
blades until the next use.
Be especially careful when changing or adjusting
blades. When you have your trimmer serviced, be sure
that both blades are sharpened or replaced at the
same time.
To promote the long life of the appliance, use your
trimmer only for the purpose intended by the manu-
facturer—to trim your beard and mustache.
turbo feature
This product is equipped with a turbo boost button.
When activated, this feature will provide 15% more cut-
ting power. This is especially useful for cutting through
thicker hair.
To activate the turbo feature:
1. Turn the Power switch to the “on” position
2. Press the Turbo button
3. Continue to press the Turbo button for as long as you
need the extra power
4. Release the Turbo button to return to normal power
replacement (removal) of blade Set
To remove blade set from your trimmer, make sure
the trimmer is in the OFF position. Remove the blade
set by placing thumb against the smaller cutter and
pushing forward, releasing the cutter assembly from
the trimmer housing. Replace with
new cutting system and reverse
the removal procedure, only this
time place your thumb on the
large cutter and snap into place.
Make sure the taper control is set
to the longest #1 position. Note:
the pivoting head may need to be
held in place when removing/replacing the blade.
growIng a beard and muStache
There are three key factors that will determine which
beard or mustache style is best for you:
1. The shape and dimensions of your face.
2. The natural growth of your
beard/mustache.
3. The thickness of your beard/mustache. If you are
unsure of the type of beard or mustache that would most
suit your face, speak with a professional hair stylist and
ask for an opinion on what style would be best. Once your
beard or mustache has been styled, it is essential that you
maintain its appearance. To do this, use your trimmer to
trim your beard/mustache weekly.
For the best trimming results, your beard should be
slightly damp (NOT WET) when using your trimmer.
This will prevent the trimmer from removing more hair
than desired.
typeS of beardS/muStacheS
gettIng Started:
outlInIng your beard
1. It is always best to begin with a clean, slightly damp
beard.
2. After you have combed through your beard in the
direction it grows naturally, you will want to outline the
desired shape, beginning under your jawline.
3. Begin defining your beard’s shape
under your chin and work upward on
each side of your face toward your
ears. Then define the upper outline of
your beard across your cheeks, past
your sideburns and toward your hairline.
now you’re ready to trIm
your beard
adJuStable 3 poSItIon taper control
Just like levers on professional clippers, the Conair taper
control is positioned at the back of the unit, so you can
hold the trimmer in your hand and adjust the lever at
the same time...while you’re clipping/trimming. This
taper control eliminates the need in some situations
for an attachment comb, because it lets you gradually
adjust the closeness of the trim. For the closest cut and
the shortest hair, push taper control up as far as it will
go to level #3. To increase cutting length, slowly push
control down.
Conair wants to thank you for choosing our
beard/mustache trimmer. We know
it will provide you with years of
reliable service.
For your safety and continued enjoyment
of this product, always read the instruction
booklet carefully before using.
®
Model GMT235CSV
Instruction Booklet
Because a different cutting edge is used in each setting,
the taper lever lengthens the life of your blades. Packed-
in hair can slow down any trimmer. To remove it without
removing the blades, take your cleaning brush and
brush the hair from the blades. If you do this after every
trimming, especially with heavy hair cutting, the blades
should remain free of cut hair. If trimmer stops cutting
and this action doesn’t help, try loosening the blades to
remove the hair.
Any other servicing should be performed by an autho-
rized service representative. The appliance has no user
serviceable parts. The product is for household use.
(see note).
If trimmer stops cutting, check to see if there is a clump
of hair lodged between the blades. If that is the problem,
unplug the clipper and then loosen the blades to remove
the hair.
If the trimmer stops cutting but does not stop running,
you will need to check the blades. For new blades, send
check or money order for $6.50 which includes postage
and handling to:
Conair Corporation
150 Milford Rd.
East Windsor, NJ 08520
NOTE: Never pull on the trimmer cord. Never twist or
wrap the cord around the trimmer. To store your trimmer,
lay it flat with the cord coiled up, then place in cylinder.
adjusting the cutting guide
1. Your trimmer includes two 5-position combs so you
can have a beard length from 1/8" (shortest) to 5/8"
(longest).
2. To use the 5-position comb, slide it over the trimmer
blades and snap it down into position (fig.A). At first,
until you become familiar with the adjustments, use the
longest trim setting (5/8"). (You can always go back and
make your beard a little shorter.)
3. This will give you the longest
“cut”, for shorter “cuts”, place
thumb on the center of the top of
the cutting guide, pushing forward
to obtain 1/8"-5/8" (see fig. B).
Your GMT235CSV comes with an
optional 5-position pivoting head. This feature allows
you to trim those hard to reach facial contours. To use
this feature:
1.) Pick up your GMT235CSV with the front of the trimmer
facing you. Using your other hand simply push in at the
bottom of the upper head. Push in and set the head to
one of the settings (the unit comes prepackaged at the
first setting, you then have four other settings you can
adjust your trimmer to). It will take some time to get used
to your own personal setting so try each one until you
find what works for you. As you try these settings you will
feel how comfortable this makes trimming your beard or
mustache.
2.) If you do not wish to use this
feature just leave the trimmer as
it was when it came out of the
package.
3.) Begin trimming your beard
using smooth, even strokes. Start
with your sideburns and work downward toward your
chin. (Never attempt to trim against the natural growth
of your beard because the hair will be cut too short.)
fig. B
1
2
3
fig. A
4 Separate Attachments:
Including Jawline &
Trimming Combs
14
NEW
piece
All In One Trimmer
with Turbo Power!
med Ida S d e
Seg urI dad
Im por tan teS
Cuando se usan apara tos eléctricos,
especialmente en la presencia de niños,
siempre se deben tomar precauciones
básicas de seguridad, entre las cuales las
siguientes:
lea to daS la S
InS tru ccI one S a nte S d e
uSa rlo
maN teN Ga eL apa rat o
aLe JaD o D eL aGU a
pel Igr o–
Cua lqu ier el ect rod om ést ico
per man ece el éct ric am ent e a ctiv o, i nclu so cua ndo el
int erru pto r e stá ap aga do. Pa ra red uci r e l r ies go de
mue rte o her ida po r d esc arg a:
1. D esc one cte el ap ara to inm edi ata men te des pué s
de usa rlo (e xce pto cu and o lo es tá car gan do) .
2. N o c olo que ni gu ard e e l a par ato do nde pu eda ca er
o s er e mpu jad o a un a b añe ra o u n la vab o.
3. N o lo us e m ien tra s s e e stá ba ñan do o t om and o
una du cha .
4. N o c olo que el ap ara to ni l o d eje ca er al a gua u
otro líq uid o.
5. S i e l a par ato ca e a l a gua , d esc oné cte lo inm edi ata -
men te. No to que el ag ua.
6. D esc one cte el ap ara to ant es de lim pia rlo .
no tra te de
alc anZ ar la
unI dad en el ag ua
adv ert enc Ia–
Par a re duc ir
el r ies go de que mad ura s, e lec tro cuc ión , in cen dio o
les ion es per son ale s:
1. Nunca deje el apara to desa tendido mientras
está conectado.
2. Este apara to no debería ser usado por , sobre
o cer ca de niñ os o per son as con a lgu na
discapacidad.
3. Use este apara to únicamente con el propósito
para el cual fue diseñado y tal como se
describe en este manual. Sólo use accesorios
recomendados por el fabricante. No utilice una
extensión eléctrica.
4. Nunca utilice el apara to si el cable o la cla vija
están dañados, si no funciona correctamente, si
ha caído, si está dañado o si ha caído al agua.
Llévelo a un centro de ser vicio autorizado para
que lo examinen y lo reparen.
5. Man ten ga el cab le ale jad o de sup erfi cie s
calientes.
6. No jale, retuerza ni enrolle el cable alrededor
del apara to.
7. Nunca deje caer ni inserte un objeto en ninguna
de las aberturas.
8. No coloque el apara to en ninguna superficie
mientras esté funcionando.
9. No use este apara to con un peine accesorio roto
o lastimado o si le faltan dientes a la cuchilla.
Esto podría provocar una herida. Asegúrese que
las cuchillas estén correctamente alineadas y
lubricadas antes de usar el apara to.
10. No lo utilice en exteriores, ni donde se están
usando productos en aerosol (spray) o donde
se está administrando oxígeno.
11. eSte producto eS para u So domÉS tIco
Solamente .
gua rde eS taS
InS tru ccI one S
det ecc IÓn de pr obl em aS
Si su apar ato no se car ga, si ga los p aso s s igu ien tes
ant es de lle var lo a u n c ent ro de ser vic io:
1. A ver igü e q ue la tom a d e c orri ent e e stá fu nci ona ndo ,
pro ban do otro ap arat o e n la to ma.
2. A ver igü e q ue la tom a d e c orri ent e n o e stá co nec tad a
a u n in ter rup tor qu e c ont rol a la lu z.
3. A ver igü e q ue el ap arat o e stá po sic ion ado en la ba se
de car ga de man era co rre cta y seg ura y que el ap arat o
est á ap agad o (“ OFF ”).
InS tru ccI one S d e o per acI Ón
1. A nte s d e u sar el ap ara to por pr im era ve z, c one cte el
cab le al a par ato po r e l o rifi cio en la ba se y p erm ita qu e
car gue du ran te una s 1 6 h ora s. A seg úre se que el ap ara to
est é a pag ado (“ OFF ”) a nte s d e c olo car lo en la bas e.
2. S iem pre av erig üe que el in dic ado r lu min oso de ca rga
est á e nce ndi do al c olo car el ap ara to en la bas e.
3. E nch ufe el ca ble en un to mac orri ent e (c onf orm e c on
la inf orm aci ón inc lui da sob re la etiq uet a d el a dap tad or).
4. E l a par to pue de per man ece r c one cta do al t om aco r-
rie nte . E sto no la stim a la ba ter ía.
5. Si le par ece q ue el apa rat o p ier de pod er mie ntra s
lo est á u san do, ap águ elo y déj elo ca rga r e n la ba se de
rec arg a d ura nte un as hor as.
6. U sar el a par ato h ast a q ue se des car gue co mpl eta -
men te pue de ayu dar a pro lon gar la vid a ú til d e la ba ter ía.
Por lo ta nto , d eje el ap ara to des car gar se per iód ica men te,
lue go cár gue lo de nue vo.
7. E l a dap tad or p ued e v olve rse ca lie nte . E sto es no rm al.
8. P ara us arlo co n c abl e: c one cte el ca ble de l a dap tad or
dire cta men te a la co rta dor a y con ect e e l a dap tad or a un a
tom a d e c orri ent e.
InS tru ccI one S d e
man ten Im Ien to
man ten Im Ien to de laS cu chI lla S
lub rIc ar laS cu chI lla S
Lub riq ue las c uch illa s a pro xim ada men te una v ez
al mes , u san do el ace ite p rov ist o. Par a n o e nsu -
cia r, h aga es to enc im a d e u n p erió dic o. E nci end a e l
apa rat o y m ant éng alo bo cab ajo . C olo que un as got as
de ace ite s obr e l as cuc hill as, a pag ue el apa rat o,
y l im pie e l e xce so de ace ite c on un pañ o s uav e.
No use d em asi ado a cei te y n o l ubr iqu e e l a par ato
más d e l o n ece sar io, p ues to que p odr ía las tim ar
el m oto r. L as pie zas d el m oto r s on lub ric ada s p er-
man ent em ent e. No int ent e lu bric arla s. Des pué s d e
lub ric ar las cu chi lla s, r egr ese el ap ara to y e l a cei te
lub ric ant e e n la ba se de alm ace nam ien to. M ant eng a
el a cei te fue ra del al can ce de los ni ños .
lImp Iar la S cuch Illa S
Las cu chi lla s f uer on dise ñad as con p rec isió n p ara u n
uso es pec ífic o, y de ber ían re cib ir u n c uid ado m uy esp e-
cia l. L im pie la s c uch illa s d esp ués d e c ada u so con el
cep illo de lim pie za pro vist o, l ueg o re gre se el a par ato en
la bas e d e c arg a. T eng a c uid ado cu and o s ea nec esa rio
cam bia r o aj ust ar las cu chi lla s. A seg úre se que la s d os
cuc hilla s s iem pre es tán ca mbi ada s o af ila das al m ism o
tie mpo . P ara se gui r d isf rut and o d e s u a par ato du ran te
año s, u tilíc elo ún ica men te con el pr opó sito pa ra el c ual
fue di señ ado : c orta r la ba rba y el b igo te.
funcIÓ n turbo
El ap arat o e stá do tad o d e u n b otó n T urb o. L a f unc ión
Tur bo ofre ce un 15% m ás fue rza y fac ilit a e l c orta do del
cab ello es pes o. P ara ac tiv ar l a fu nci ón Tur bo:
1. E nci end a e l ap arat o (“ ON” ).
2. O prim a e l b otó n T urb o.
3. Sig a o prim ien do el bot ón Tur bo mie ntra s n ece site
más fu erz a.
4. A flo je el b otó n T urb o p ara re gre sar al po der no rm al.
Sac ar (ca mbI ar) el Ju ego de
cuc hIl laS
Par a s aca r e l j ueg o d e c uch illa s: A seg úre se que e l
apa rat o e sté ap aga do (“O FF” ). C on el p ulg ar deb ajo
de la cuc hill a p equ eña , le van te el jue go de cuc hil-
las h ast a d ese nca jar lo. P ara r eem pla zar e l j ueg o
de cuc hill as: A seg úre se que e l b otó n d e a jus te de
lo lar go del r eco rte e sté e n la
pos ici ón más la rga (n o.1 ). C olo que
el jue go de cuc hill as enc im a d el
cab eza l y pre sió nel o has ta que
cai ga en pos ici ón, c on el ded o
pul gar s obr e l a c uch illa g ran de.
Par a lim pia r las c uch illa s, sig a
est os pas os y e nju agu e la s c uch il-
las so lam ent e b ajo ag ua cor rie nte .
bar baS y bIg ote S
El t ipo d e b arb a o d e b igo te que m ás con vie ne a s u
ros tro de pen de de:
1. L a fo rm a y el ta mañ o d e s u ro stro .
2. L a f orm a d el c rec im ien to nat ura l d e s u b arb a o de
su big ote .
3. E l e spe sor de su ba rba o de su big ote .
Si no est á s egu ro del ti po de bar ba o b igo te que le
con vie ne, bu squ e e l c ons ejo de un es tilis ta pro fes ion al.
Des pué s d e d arle fo rm a a su ba rba o a s u b igo te, te ndr á
que m ant ene r s u a spe cto , u san do la cor tad ora un a v ez
por se man a.
Par a m ejo res re sul tad os, hum ede zca li ger am ent e s u
bar ba o s u b igo te ant es de rec orta rlo s (N O L O M OJE ).
Est o lo gra rá un cor te más pr eci so.
tIp oS de bar baS y de bIg ote S
cor tar Su ba rba
el con tor neo
1. S e le ha rá más fá cil cor tar su ba rba si es tá lim pia y
lig era men te hum ede cid a.
2. P ein e s u b arb a e n la di rec ció n d el c rec im ien to nat ura l
del pe lo y e mpi ece a dar le for ma.
3. D éle fo rm a a su ba rba em pez and o
deb ajo de la qu ija da y s ubi end o h aci a
la ore ja, e n c ada la do de su ros -
tro . S iga d and o f orm a a l á rea d e la
mej illa , a la s p atil las y al n aci mie nto de l p elo .
aho ra, eS tÁ lIS to par a c ort ar
Su bar ba
bot on de aJu Ste de l r eco rte co n
3 p oSI cIo neS
Al i gua l q ue las co rta dor as pro fes ion ale s, s u c orta dor a
tie ne un bot ón de aju ste de l re cor te que pe rm ite aj ust ar
lo lar go del co rte a med ida qu e c orta el ca bel lo. El bo tón
est á u bic ado en la pa rte tra ser a d el a par ato .
El b otó n d e a jus te per mite co rta r e l c abe llo m ás cor to o
más la rgo , s in ten er que us ar un pei ne acc eso rio . P ara
un cor te más co rto , d esli ce el b otó n h aci a a rrib a, h ast a
la pos ici ón 1. P ara un co rte m ás lar go, de slic e e l b otó n
hac ia aba jo, ha sta la po sic ión 3.
Usa r el bo tón de aju ste de l re cor te p rol ong a la vid a út il d e la s
Gra cia s p or e sco ger la co rta dor a p ara la ba rba
y e l b igo te de Con air. Le ga ran tiz am os que
est e a par ato le da rá año s d e s erv ici o s egu ro.
Par a s u s egu rid ad y p ara se gui r d isf rut and o d e
est e p rod uct o d ura nte añ os, si em pre le a la s
ins tru cci one s c uid ado sam ent e a nte s d e u sar lo.
®
Model GMT235CSV
Manual de Instrucciones
cuc hilla s, p ues to que nu nca us an el m ism o á ngu lo par a
cor tar .
Su cor tad ora p ued e p erd er vel oci dad s i r eco rte s d e
cab ello e stá n t rab ado s e n l as cuc hilla s. Par a l im pia r
las c uch illa s s in ten er que re mov erla s, use e l c epi llo
de lim pie za pro vist o. Lim pie la s c uch illa s d esp ués d e
cad a u so, lu ego p ong a u nas c uan tas g ota s d e a cei te
lub ric ant e e n la s c uch illa s. H ace r e sto de spu és de cad a
uso , e spe cia lm ent e c uan do se cor ta muc ho cab ello ,
man ten drá la s c uch illa s e n c ond ici ón ópt im a. Si la
cor tad ora de ja de fun cio nar y que es to no sol uci ona el
pro ble ma, af loj e la s c uch illa s p ara lim pia rla s.
Par a c ual qui er o tro se rvi cio , lle ve su apa rat o a un ce ntro
de ser vic io aut oriz ado . E l a par ato n o t ien e p iez as que
pue dan se r a jus tad as o re par ada s p or e l u sua rio .
Si s u c orta dor a d eja d e c orta r, c erc iór ese q ue no hay
pel os tra bad os en las cu chi lla s. S i e sto es el pr obl em a,
des enc huf e e l a par ato y re mue va las c uch illa s p ara
lim pia rla s.
Si s u c orta dor a d eja de co rta r, p ero si gue fu nci ona ndo ,
ins pec cio ne l as c uch illa s. S i es tén em bot ada s, c ám bie las .
Par a c om pra r n uev as cuc hilla s, m and e u n c heq ue o u n
giro po sta l d e $ 6,5 0US a la dire cci ón más ab ajo , ju nto
con el fo rm ula rio de pe did o p ara pa rte s d e re pue sto .
Con air Cor por atio n
150 M ilfo rd Rd.
Eas t W ind sor , N J 0 852 0
NOT A: N unc a ja le, tu erc e o en rol le el c abl e a lre ded or d el
apa rat o. C uan do no use el ap ara to, de je el c abl e li bre al
lad o d el a par ato y g uar de el a par ato so bre un a s upe rfic ie
pla na o ade ntro d el cili ndr o de alm ace nam ien to
pre vist o.
guí as aju sta ble s
1. Su cortadora inc luye dos guías de 5 posiciones las
cuales permiten ajustar lo largo del recorte desde 3
mm (lo más corto) hasta 16 mm (lo más largo).
2. Cuando desea usar la guía,
ensártela sobre las cuchillas (Fig.
A). Use la posición más larga
(16 mm) hasta acostumbrarse
al tamaño del recorte (siempre
podrá volver a acortar la barba).
3. P ara lograr un recorte más
corto, posicione el pulgar en el centro de la cuchilla
grande y oprima. Esto logrará cortes de 3 mm a 15
mm de largo (F ig.B).
cab eza l o sci lan te
Su cortadora está dotada de un cabezal oscilante
con 5 posiciones, lo cual facilita el cortado en áreas
difíciles de alcanzar y logra un cortado mucho más
cómodo. P ara mover el cabezal:
1. Coja la cortadora con la parte delantera frente a
usted. Gire el cabezal con la otra mano, oprimiendo
la parte inferior del mismo hasta que llegue a la
posición deseada. Le aconsejamos que pruebe cada
posición hasta que encuentre la posición que mejor
le conviene.
2. Si usted no desea mover el
cabezal, simplemente déjelo en la
posición original.
3. Corte su barba con movimientos
suaves y parejos. Empiece por las
patillas, luego baje hacia la quijada. Nunca corte la
barba en la dirección opuesta a la del crecimiento de
ba hasta conseguir el tamaño deseado.
fig. B
1
2
3
OPRIMA
Largo variable:
1: 1.8mm
2: 1.2mm
3: 0.6mm
BOTÓN DE AJUSTE DE LO LARGO DEL RECORTE
INSTALAR
OPRIMA
SACAR
OPRIMA
fig. A
Professional
Quality
Solid Steel
Facial Blade
4 a cce sori os, in clu so
guí as y g uía s p ara
la qui jad a
Cor ta dor a m ult ius o
¡co n b otó n t urb o!
1 4
Nuevo
pie za s
Cal ida d
Pro fes ion al
Cuc hill a p ara
Bar ba y B igo te
de Ace ro