![background image](http://html.mh-extra.com/html/bartscher/162550/162550_instruction-manual_476743022.webp)
- 43 -
7. Possible Malfunctions
In case of malfunction, disconnect the device from its power source. Before contacting
the service or sales agent, verify - based on the table below - whether it is possible to
eliminate disruption in operation.
Problem
Cause
Solution
The device is connected
to the power supply but
the green indicator is off
andthe device does not
heat.
The plug is not properly
connected to the socket.
Safety fuse tripped.
The overheating
protection has been
activated.
Remove the plug and
insert properly into
socket.
Check fuse, connect
device to another socket.
Press
RESET
button in
the connection box.
The heating indicator is
on but temperature
does not rise.
Interrupted contact with
the heating element.
Damaged heating
element.
Contact the service
company.
Contact the service
company.
The green power supply
indicator light is on but
despite setting the
temperature the heating
indicator light is off.
The preset temperature
has been reached.
Damaged temperature
control knob.
Damaged indicator light.
Check operation after
the temperature setpoint
change.
Contact the service
company.
Contact the service
company.
The device stops heating
after some time.
The overheating
protection has been
activated.
Press
RESET
button in
the connection box. When
the overheating protection
is activated again after a
short time, contact
the vendor.
If you cannot remove the malfunctions:
-
do not open the body,
-
notify the customer service point or contact the sales
agent, while providing the following information:
type of malfunction;
article and serial number (rating plate at the
rear of the device).