![background image](http://html.mh-extra.com/html/bartscher/162550/162550_instruction-manual_476743014.webp)
- 35 -
Connection
DANGER! Electric shock hazard!
The device can cause injuries due to improper installation!
Before installation and connecting the local power grid
specification should be compared with that of the device
(see rating plate).
Connect the device only in case of compliance!
Before connecting the device to the power supply make sure that the voltage and
frequency values on the rating plate are conforming to the existing electric
installation.
The allowable voltage deviation is ±10%.
Make sure that appropriate connection with protection conductor is available,
conforming to the valid regulations. Use cable of sufficient cross section for connection
to the power supply.
Between the device and the electric system there must be the multipole switch
installed, appropriate for the device power. The switch of contacts separation of at
least 3 mm must be easily accessible.
Connect the device to the electric installation according to the valid international,
national, and local regulations.