![background image](http://html.mh-extra.com/html/bartscher/162550/162550_instruction-manual_476743019.webp)
- 40 -
Set the temperature controller and switch in position
“0”
when the frying process is
finished and the device will be no longer used.
Draining and removing of frying oil/fat
The frying oil/fat should be replaced when it does not fulfil the requirements.
After cooling down
drain the oil/fat from the frying basin to appropriate
container using the drain tap. Make sure that the container is placed in a
stable way.
NOTE!
Remove used frying oil/fat with care for environment and according to the
valid regulations.
The overheating protection system
When the deep fryer is turned on with too little or no oil/fat in the basin, it will
automatically turn itself off at approx. 230 °C to protect against overheating.
In such situation disconnect the device from the power supply.
After the device has automatically turned off via the overheating prevention system
it can only be reactivated by pressing the
RESET
button on the bottom of the
connection box.
To do this wait for the device to cool down, then unscrew
the
RESET
button plug anti-clockwise, press the pin,
and replace the plug. After those operations the device
may be turned on as usually.