![background image](http://html.mh-extra.com/html/bartscher/162550/162550_instruction-manual_476743017.webp)
- 38 -
CAUTION!
Do not use the unit without oil in the basin. Always ensure the basin is filled
with oil between the „MIN“ and „MAX“ markings. If necessary add some oil.
WARNING!
DANGER OF BURNS! When the oil level is below the MIN
marking, the risk of the oil catching fire is increased.
HOT EXTERNAL SURFACE! When the oil level is above the
MAX marking, hot oil may spill out.
Device start-up
Connect the device to the power supply.
The green power control light will come on.
Set the temperature controller to required temperature between 0 °C and 190 °C,
rotating it clockwise.
Set required power level with use of appropriate switch. Level 2 means the maximum
power of the device (15 kW); level 1 means 1/3 of power (approx. 5 kW).
While heating up the orange heating indicator light will come on, and will go off
when the preset temperature is reached. When the temperature in the basin
drops the red indicator light comes on again and the device heats again.
WARNING! Risk of burns!
When in use, the device and oil/fat in the basin are very
hot and the oil/fat is at risk of catching fire.
The device should not remain in use for extended periods
of time!