![background image](http://html.mh-extra.com/html/bartscher/162550/162550_instruction-manual_476743015.webp)
- 36 -
5.2 Operation
CAUTION!
The deep fryer can only be used by individuals who have been instructed in the
proper use of the device and dangers that may arise during the frying process.
Preparation of the device
Remove all equipment from the device.
Remove the connection box with the heating element from the device, pulling it
gently upwards (until
“click”
is heard).
Remove the cover from the basin bottom, using both handles.
Before the device operation clean it and its equipment according to the
instructions in
section 6 “Cleaning”
. Protect the electric system and the
connection box from the water penetration.
Then thoroughly dry
the device
and all equipment elements!
Put the cover into the basin. The cover acts as the spacer between the heating
element and the food residuals tray.
Carefully put the connection box with the heating element on the back edge of the
device. The pin in the connection box lower part must enter the hole in the main
device. In this way the connection box is properly mounted.
Note
: For safety reasons the device only operates when the connection box is
properly mounted to it, so that the microswitches enable the device to function.
Control panel
Power indicator
(green)
Heating indicator light
(orange)
Switch
Temperature
controller