Barco SIM 7Q, User Manual

Page: 95 / 290

7. Advanced
7.4.1 Load fi le
When to load a fi le ?
In some cases the user wants a particular fi le to be used for the display of a particular source. In this case the user should load the
desired fi le from the image fi les menu. The load fi le option will allow the user to choose between several fi les corresponding more
or less to the active source speci fi cations.
In normal operation the fi le selection (load) will be done automatically by Auto Image.
How to load a fi le ?
1. Press MENU to activate the Tool bar
2. Press → to select the Image fi les item
3. Press ↓ to Pull down the Image fi les menu
4. Use ↑ or ↓ to select Load
Image 7-22
5. Press ENTER
A dialog box is displayed
Image 7-23
6. Use ↑ or ↓ to select the desired fi le
Tip: For more information (speci fi cations) on the image
fi les see the Appendix section
7. Press ENTER
The fi le is loaded and the image is adapted.
What to do if the image is not perfect ?
If the displayed image is not correct after Auto Image or after selecting the best fi tting fi le, go to the Edit menu, select the active fi le
and change the settings.
R59770066 SIM 7Q SERIES 07/10/2013 91