Barco SIM 7Q, User Manual

Page: 103 / 290

7. Advanced
7.4.8 Forced fi le load
Forced fi le load
In some cases the user wants only one particular fi le to be loaded for a particular input (source) i.e. to prevent the (automatic) load
of an inadequate fi le.
One can link a fi le to every possible input of each layer.
If a fi le is already selected (forced) to that particular input it will be indicated in the menu.
How to force a fi le to be loaded ?
1. Press MENU to activate the Tool bar
2. Press → to select the Image fi les item
3. Press ↓ to Pull down the Image fi les menu
4. Use ↑ or ↓ to select Forced fi le load
5. Press → to open the menu
6. Use ↑ or ↓ to select the desired layer (for example Layer 1)
7. Use ↑ or ↓ to select the desired input (for example Data on BNC)
Image 7-38
Note: Inputs that are not hardware compatible with this layer are greyed out.
Note: if a fi le is already forced for that input it will be shown on the right.
8. Press ENTER
The Load dialog box is displayed
9. Use ↑ or ↓ to select the desired fi le (for example /Standard/SXGA+@60.xml )
10.Press ENTER
The fi le is selected and will be loaded in the future.
To delete the forced fi le, go to the desired input and press ENTER.
R59770066 SIM 7Q SERIES 07/10/2013 99