84
PresentationPRO-II • User’s Guide
4. Menu Orientation
Remote Control Menu
•
Remote Control
— enables or disables remote control.
~
When remote control is on, the {
HOME
} buttons disappears, the
PresentationPRO-II front panel is disabled, and all control originates
from the external controller’s console.
~
To re-establish “local” control, remote control must be turned off from the
Remote Control Menu
.
•
Unit IP
— displays the IP address of PresentationPRO-II.
~
When remote control is on, this address will be assigned by the external
controller’s DHCP server.
~
When remote control is on, you can change the PresentationPRO-II
static IP address. When you navigate to the field, the “
^
“ symbol
appears below the first quad, and a {
NEXT IP QUAD
} button appears:
•
Use the
ADJ
knob to change the quad’s setting.
•
Press {
NEXT IP QUAD
} to advance to the next quad.
•
When you reach the last quad, the {
SET IP
} button appears.
Press {
SET IP
} to store the unit’s new Static IP address.
In the “
Status
” section:
•
The top line indicates the connection status with the external controller (e.g.,
Not
Connected
,
Establishing Connection
,
Connected
, etc.).
•
Ctrlr IP
— With a connection established, displays the IP address of the external
controller.
•
Destination
— with a connection established, displays the destination assigned
to PresentationPRO-II by the external controller.
•
Router
— with a connection established, displays the utilization of routers:
~
[Internal]
indicates that PresentationPRO-II’s local router is used for
source connections (the eight rear-panel analog connections plus the
two rear-panel SD/HD connections).
~
[External]
indicates that an external (upstream) router is used for source
connections to PresentationPRO-II. In this case, and a minimum of rear-
panel PresentationPRO-II connections are used — connected directly to
one or more router outputs.
In Chapter 6, refer to the “
Using Remote Control
” section on page 116 for additional
details.
Summary of Contents for PresentationPRO-II
Page 1: ...r d m molJff Manual 26 0405000 00 Revision A...
Page 12: ...xii PresentationPRO II User s Guide Table of Contents...
Page 132: ...120 PresentationPRO II User s Guide 6 Operations Capturing Still Frames...
Page 144: ...132 PresentationPRO II User s Guide K p Input and Output Resolutions...
