Barco PresentationPRO-II, User Manual

Page: 57 / 166

PresentationPRO-II • User’s Guide 45
4. Menu Orientation
System Menu
póëíÉã=pìÄ=jÉåìë
The following sub menus can be accessed from the System Menu :
•
Diagnostics Setup Menu
•
Reset Menu
•
Software Version Menu
•
Console Port Setup Menu
•
EDID DVI Input Format Menu
•
Technical Support Menu
aá~ÖåçëíáÅë=pÉíìé=jÉåì
From the System Menu , press { DIAG } to display the Diagnostics Setup Menu , a sample
of which is shown below.
Figure 4-17. Diagnostics Setup Menu (sample)
The Diagnostics Setup Menu enables you to perform a variety of diagnostic tests on the
PresentationPRO-II. The following functions are provided:
•
Reset Rotary Encoders — (Yes/No) determines whether or not you wish to reset
the rotary encoder values when you exit the Rotary Encoder Menu .
•
NVRAM Battery — displays the condition of the system’s NVRAM battery.
•
Press { START LED TEST } to begin testing all LEDs. The test takes several
minutes to complete. Press { EXIT } at the conclusion of the test.
•
Press { ROTARY ENCODER } to display the Rotary Encoder Menu . Refer to the
“ Rotary Encoder Menu ” section on page 46 for details.
•
Press { KEY DETECT } to display the Key Detect Menu . Refer to the “ Key Detect
Menu ” section on page 47 for details.
NVRAM Battery [ OK ]
H
O
M
E
N
A
V
A
D
J
DIAGNOSTICS SETUP
START
LED TEST
KEY
DETECT
Reset Rotary Encoders Yes
ROTARY
ENCODER
B
A
C
K