144
PresentationPRO-II • User’s Guide
`K==réÖê~ÇáåÖ=pçÑíï~êÉ
Ethernet Upgrade Method
23.
Click
Communication > Ethernet > Connect
to display the
Ethernet
Connection
dialog.
Figure C-9.
Ethernet Connection Dialog (sample)
24.
In the dialog, enter the IP address of the PresentationPRO-II:
192.168.0.10
. The
default port number is
3000
.
25.
Click the
Connect
button. If the connection is successfully established, the
message “
Connect via Ethernet successful
” will be shown in the Status Bar. If
you cannot connect, refer to the “
Troubleshooting Ethernet Communications
”
section on page 145 for instructions.
26.
To upload files to the PresentationPRO-II unit, click the "
Open script file to read
and upload
" button.
27.
In the dialog, select "
Upload_All.sld
" and click
Open
. The flash loader echoes
commands while the flash is being loaded.
28.
It takes approximately three minutes to load the flash memory using the Ethernet
method. When complete, the Flash Loader utility displays the “
Upload
Complete
” message. Click
OK
to continue.
29.
Cycle power on the PresentationPRO-II unit, and exit the Flash Loader utility.
30.
On PresentationPRO-II, perform a factory reset:
a.
From the
Home Menu
, press {
SYSTEM
} to access the
System Menu
.
b.
From the
System Menu
, press {
RESET
} to display the
Reset Menu
.
c.
On the
Reset Type
line, select
FACTORY
.
d.
Press {
RESET
}. When the confirmation screen appears, press {
YES
} to
reset the system to factory default values.
31.
On PresentationPRO-II, verify that the new software has been loaded correctly:
a.
From the
Home Menu
, press {
SYSTEM
} to access the
System Menu
.
b.
From the
System Menu
, press {
SW VER
} to display the
Software
Version Menu
, then verify the new version.
Note
If the
Ethernet
menu pick is grayed out, set the COM port to
None
.
Warning
Use caution when performing this step, as all saved files and
saved still frames will be erased.
Summary of Contents for PresentationPRO-II
Page 1: ...r d m molJff Manual 26 0405000 00 Revision A...
Page 12: ...xii PresentationPRO II User s Guide Table of Contents...
Page 132: ...120 PresentationPRO II User s Guide 6 Operations Capturing Still Frames...
Page 144: ...132 PresentationPRO II User s Guide K p Input and Output Resolutions...
