142
PresentationPRO-II • User’s Guide
`K==réÖê~ÇáåÖ=pçÑíï~êÉ
Ethernet Upgrade Method
13.
Check the “
Use the following IP address
” check box, as shown below.
Figure C-7.
Internet Protocol (TCP/IP) Properties Dialog (sample)
14.
Set the IP Address to
192.168.0.191
.
15.
Set the Subnet Mask to
255.255.255.0
.
16.
Set the Default Gateway to
192.168.0.1
.
17.
When complete, click
OK
to close the dialog, then click
OK
to close the Local
Area Connection Properties Window.
18.
(Optional). Click
Start > Run
to display the
Run Dialog
.
a.
In the
Open
field, type
cmd
, then click
OK
to open a DOS command
window.
b.
In the DOS command window, type
ipconfig
, and verify that the new IP
address is correct.
c.
Close the DOS command window.
Note
The static IP address shown above is within the unit’s user-
defined IP address range. If this address has already been
assigned to another device, select a different IP address
within the following range:
192.168.0.191
→
192.168.0.240
.
Summary of Contents for PresentationPRO-II
Page 1: ...r d m molJff Manual 26 0405000 00 Revision A...
Page 12: ...xii PresentationPRO II User s Guide Table of Contents...
Page 132: ...120 PresentationPRO II User s Guide 6 Operations Capturing Still Frames...
Page 144: ...132 PresentationPRO II User s Guide K p Input and Output Resolutions...
