PresentationPRO-II • User’s Guide
91
5. System Setup
Comprehensive Input Setup
f.
If required, scroll to the
Color Space
line and set the input’s color space.
Choices include
SMPTE
and
RGB
. Note that the system may
automatically set the
Color Space
based on the selected
Format
.
g.
If required, scroll to the
Sampling Mode
line and set the sampling mode
for the selected input — either 1:1 or oversample.
h.
Scroll to the
Contrast
line and set the input’s contrast as desired.
i.
Scroll to the
Brightness
line and set the input’s brightness as desired.
j.
Scroll to the
Gamma
line and set the input gamma as desired.
k.
Scroll to the
Input Sync Type
line and set the type of sync used by the
selected source. Choices include
H/V
,
CSync
(composite sync),
SOG
(sync on green) and
Auto
.
l.
For a video source that contains film transfer material, scroll to the
Pulldown Compensation
line and enable or disable 3:2 sequence
detection.
m.
Scroll to the
Sync Slice
line and adjust the threshold if desired.
n.
Scroll to the
Sharpness
line and set the input’s sharpness as desired.
The adjustment range is from -10 (soft) to 10 (sharp).
o.
Press
{
SAVE
} to save the selected input in the designated file.
p.
Press
{
BACK
} to return to the
Input Menu
.
4.
Press {
SIZING
}
to access the
Sizing Menu
. This menu is context sensitive — it
changes
depending on the selected
Sampling Mode
.
a.
If
1:1 Sampling
is selected, adjust
Clock Phase
,
H Total
,
H Active
,
H Position
,
V Total
,
V Active
and
V Position
as required.
b.
If
Oversample
is selected, adjust
Right Edge
,
Left Edge
,
Top Edge
or
Bottom Edge
as required, to fit the image precisely in its raster box.
c.
Press
{
SAVE
} to save the selected input in the designated file.
d.
Press
{
BACK
} to return to the
Input Menu
.
5.
Press {
COLOR BALANCE
}
to access the
Color Balance Menu
.
a.
For
RGB
sources, adjust
Red
,
Green
and
Blue Contrast
and
Brightness
as required.
b.
For
Composite
,
S-Video
or
YP
b
P
r
sources, adjust
Saturation
and
Hue
as required.
c.
If required, press
{
RESET ALL
} to return to default values.
d.
Press
{
SAVE
} to save the selected input in the designated file.
e.
Press
{
BACK
} to return to the
Input Menu
.
Note
The default
Sync Slice
level has been optimized for virtually
all sources that will be encountered and should rarely, if ever,
require adjustment. For additional details, in Chapter 4 refer
to the “
Input Menu Functions
” section on page 30.
Summary of Contents for PresentationPRO-II
Page 1: ...r d m molJff Manual 26 0405000 00 Revision A...
Page 12: ...xii PresentationPRO II User s Guide Table of Contents...
Page 132: ...120 PresentationPRO II User s Guide 6 Operations Capturing Still Frames...
Page 144: ...132 PresentationPRO II User s Guide K p Input and Output Resolutions...
