manualshive.com logo in svg

Barco MGP 15 Dicom Theater, Hardware & Software Installation & User Manual

Share
Download
Barco MGP 15 Dicom Theater Hardware & Software Installation & User Manual Download Page 14

Introduction

14

DICOM Theater installation overview

To install the DICOM Theater system completely, you have to 
follow these steps:

1. Install the BarcoMed display controller(s) in the PC. For more 

information, please refer to the section about the “Display 
controller installation”.

2. Install and connect the medical grade projector(s) and 

display(s). For more information, please refer to the MGP 15 
Owner’s Manual and the display User Manual.

3. Install the BarcoMed driver software. For more information, 

please refer to the section about the “BarcoMed software 
driver installation”.

4. Install the MediCal Pro and DICOM Theater software. For 

more information, please refer to the section about the 
“MediCal and Dicom Theater software installation and 
usage”.

5. Start and use MediCal Pro. For more information, please refer 

to the section about the “MediCal and Dicom Theater 
software installation and usage” and to the MediCal Pro User 
Manual.

6. Install the optical sensor(s).

How to control the medical grade projector

The projector can be controlled:

•

Partly, by using the Dicom Theater software. For more 
information, please refer to the section about the “MediCal 
and Dicom Theater software installation and usage”.

•

Completely, by using the projector’s on-screen display. This 
can be done with the projector’s remote control unit. For 
more information, please refer to the MGP 15 Owner’s 
Manual.

Summary of Contents for MGP 15 Dicom Theater







































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands