Barco MES ACURAS HEAD, User And Installation Manual

Page: 39 / 131

7. Installation
A
B
Image 7-4
A
Auto Alignment Head
B Mechanical support
7. Connect all the power cable and the SFTP Cat.5e cable to the Auto Alignment Head.
7.2 Hardware connections
Overview
• Preparing SFTP Cat.5e cable
• Power connections
• Connecting the LEX unit to the MCU
• Connecting the SFTP Cat.5e cable
• Connection diagram
7.2.1 Preparing SFTP Cat.5e cable
Necessary parts
• Ferrites: B195382 (2x)
• Warning label: R870792 (2x)
How to prepare SFTP Cat.5e cable?
1. Make a loop at one end of the cable.
Image 7-5
preparation: making a loop
2. Fix this loop using ferrite as indicated in the picture below.
Image 7-6
preparation:
fi xing the loop
3. Repeat steps 2 and 3 at the other end of this cable.
Image 7-7
preparation:
fi xing the loop at the other end of the cable
4. Put one end of the cable in. the middle of warning label as indicated in the picture below.
Note: This warning label is an adhesive PVC fi lm.
R59770509 MES ACURAS HEAD - AUTO ALIGNMENT HEAD 24/11/2010 31