Barco MES ACURAS HEAD, User And Installation Manual

Page: 75 / 131

8. Getting started
1
a
c d
b
Image 8-64
Example: Single channel setup (Without Blend Zone)
a to d
corners of channel 1
Measuring corners in multi-channel setup
Without Blend Zone
Consider a display system where you have a projected image consisting of two non-overlapping channels. In this case eight corners
in total need to be included in the set of positions to be de
fi ned. At the corners where two channels are meeting each other, both
corners may be included in one single position.
1 2
a
b c d
e f
g
h
Image 8-65
Example: Multiple channels setup (Without Blend Zone)
1 channel 1
2 channel 2
a, b, g, h
corners of channel 1
c, d, e, f corners of channel 2
With Blend Zone
Consider a display system where you have a projected image consisting of two overlapping channels. In this case eight corners in
total need to be included in the set of positions to be de
fi ned. Also here, the common corners will be included in one single position.
Of course it is possible to include more than two projector corners of the same channel in a single position if they are not too far
away from each other.
R59770509 MES ACURAS HEAD - AUTO ALIGNMENT HEAD 24/11/2010 67