Barco MES ACURAS HEAD, User And Installation Manual

Page: 18 / 131

2. Safety
2.2.9 Vibrations
Vibrations
The device is not motion base compatible. It is only to be permanently installed on still, non-moving structures.
2.2.10 Repacking
On Repacking
Save the original shipping carton and packing material; they will come in handy if you ever have to ship your equipment. For maxi-
mum protection, repack your set as it was originally packed at the factory.
2.2.11 Emergency stop
Emergency stop
The emergency stop button is the large, circular red switch located at the rear side of the device. Pressing the emergency stop
button will disconnect the main power going to the modules of the MES ACURAS HEAD. To release it, turn the button in the direction
of the arrow. It should only be re-enabled if the situation is fully safe.
Use the emergency stop button only in emergencies.
Image 2-6
Emergency label
2.2.12 Moving parts
Moving parts
• Keep your hands and fi ngers away from all moving parts.
• Do not wear loose clothing or jewelry. Keep long hair, clothing, scarves, rings, bracelets, gloves and such away from moving
parts, since they can be caught in moving parts.
• No people are allowed to come near the unit when it is in operation
• Do not operate the unit when other people can come near to the unit.
• Keep children, outsider, and other untrained persons away from the unit and its moving parts.
• Ensure that there is no loose cabling from the unit that can get caught by the moving parts.
Immediately stop operation if Gimbal Pan/Tilt does not respond to control
• Test Gimbal Pan/Tilt movement when initially operating the unit.
• Ensure Pan movement is going full -180º and +180º.
• Ensure Tilt movement is going full -80º and +30º.
• Ensure all controls function smoothly and do not stick or bind when operated.
• Avoid any type of manual intervention when operating the unit.
Image 2-7
Moving parts warning label
Image 2-8
Moving parts warning label
10 R59770509 MES ACURAS HEAD - AUTO ALIGNMENT HEAD 24/11/2010