Barco MES ACURAS HEAD User And Installation Manual Download Page 105

Page: 105 / 131

9. Operating Acuras

2. Check the

Dynacolor Active

checkbox. See image 9-29.

3. Select an active dynacolor set of that projector from the drop down list.

Note:

A warning message is displayed if the selected set is not active.

The x and y coordinates and L values of the selected active set are updated in the corresponding sections of Measured values
and Desired values automatically.

4. Check the

Pause unselected projectors of group

checkbox to pause all the unselected projectors. See image 9-29.

5. Click the

Measured

button, the automatic calibration process is now started.

Image 9-29
Measuring the Dynacolor

Note:

The measured luminance values, entered in the L

elds are automatically rescaled to end up with L=1 for white.

Note:

The values highlighted in orange background color are not uploaded to the projector yet.

A message appearing in the feedback section shows the progress information. See image 9-29.

6. Click the

Apply

button to upload the measured values (x, y and L) of the measured colors to the selected projector.

R59770509 MES ACURAS HEAD - AUTO ALIGNMENT HEAD 24/11/2010

Summary of Contents for MES ACURAS HEAD




































































































































Search results

Summary of Contents for MES ACURAS HEAD

Reviews:

Brands by name

Popular brands

Barco MES ACURAS HEAD, User And Installation Manual

Search results

Summary of Contents for MES ACURAS HEAD

Reviews:

Brands by name

Popular brands