Barco MES ACURAS HEAD, User And Installation Manual

Page: 31 / 131

5. Facility and system requirements
Image 5-2
5.4 Power requirements
Mains power
Mains power must be in the range 100–250V 50–60Hz.
Power consumption
The total power consumption of the Auto Alignment Head is 25 Watts at 230 Volt.
5.5 View requirements
Camera position
The best position for the Auto Alignment Head is that position where its camera is in the Design Eyepoint.
Camera/Spectrometer fi eld of view
Adequate space must be provided around the Auto Alignment Head. No physical or mechanical obstruction should be present in
the camera or spectrometer
fi eld of view.
5.6 Access requirements
Auto Alignment Head location and access
There must be enough space around the Auto Alignment Head to allow access to and fl awless operation of the unit.
Following rules must be taken into account:
• never try to stop the moving parts manually, it may damage the motor of the Auto Alignment Head.
• do not wear loose clothing or jewelry. Keep long hair, clothing, scarves, rings, bracelets, gloves and such away from moving
parts, since they can be caught in moving parts.
• no access allowed near to the Auto Alignment head when it is in operation. Stay outside the moving range of the unit.
R59770509 MES ACURAS HEAD - AUTO ALIGNMENT HEAD 24/11/2010 23