Barco – ISIS LFC – Installation Guide ______________________________________________________________ 9
2.1.4
Removal of the rear cover
WARNING:
Once the warranty label is removed, the warranty will be voided.
A new warranty label is available in the kit which can be attached after installation
by a qualified person according to the installation procedure described hereafter.
Refer to Figure 2-4 MDP 471 Rear Cover removal.
• Loosen the 11 captive screws A; captive screws do not need to be completely removed.
• Unscrew the 4x2 captive screws B and remove the Backlight Covers (4x).
• Unscrew the 4x2 screws C (+2 countersunk screws) when present.
• Unscrew the 2x4 screws D when a TS-Cover is present (Desktop version only).
• Carefully lift up and flip over the rear cover.
Do not remove the Rear Cover completely and be careful of the connector cables between
the Rear Cover and the Backplane. The Backplane is the back of the LCD panel and
backlights including the attached interconnected electric boards. Carefully put the Rear
Cover beside the backplane of the LCD.
• To completely disconnect the Rear Cover when needed, disconnect the PIB (Panel
Interface Board) connector J7 from the Fan Module.
Figure 2-4 MDP 471 Rear Cover removal
.
