Barco – ISIS LFC – Installation Guide _____________________________________________________________ 19
This ends the “LFC Install” procedure.
When LFC is installed:
•
The Janus board is configured on start-up when the Janus board was detected.
•
LFC will be enabled on start-up (when it was enabled before).
•
The LFC enabled/disabled item will be available in keypad & OSD menu’s (see
“Enabling/Disabling LFC” (Administrator Menus))
•
A Fault will be generated (and indicated) when the Janus board was not
detected.
•
A Warning will be generated (and indicated) when the flash does not contain
valid LFC calibration data.
