18 _____________________________________________________________ Barco – ISIS LFC – Installation Guide
Verify if the software version of the ISIS is between V2.04 and V2.08 by typing “VE” in
the input field and click “Send”.
The terminal returns the command send and the answer from the ISIS display:
…“VE
…Received data: V2.08”
Remark: Barco protocol commands are case sensitive: e.g. if the command “ve”
instead of “VE” is sent, the display responds with:
“ve
Error code 1 : invalid command”
Important: Do not continue if the software version doesn’t match one of the
following versions: V2.04, V2.05, V2.06, V2.07 or V2.08.
Contact Barco for instructions if you have a different software version.
5.
Enter WITH UTMOST PRECISION the following command in the input field:
@SETV,621,1
Entering a wrong command may render the display unserviceable and
requires a factory return.
Click “Send”.
The terminal returns following message:
“@SETV,621,1
Acknowledge”
Click “Disconnect” and “Finish” to end.
The terminal returns following message:
“Barco Protocol session closed successfully”
