601
–
426-03
F70 Series
98
Image 8-24: Symmetric Bow correction.
4.
To enable a symmetric adjustment, make sure the
Symmetric
slider is set to
On
.
The slider is enabled when set to the right and when it is colored blue.
5.
Select the side of the picture to be bow corrected, confirm by pressing enter, and use the arrow keys to adjust
the angle and linearity (length) of the vectors.
The angle is adjusted by the up and down arrows on the remote control, and the linearity is adjusted by the left
and right arrows.
The correction will occur symmetrically on each side of the center of the highlighted side.
When corrected with the values in the image above, the picture will occur as shown below.
Repeat this step for all sides of the picture that has to be corrected.
Image 8-25: Symmetric bow corection
Non symmetric bow correction
1.
Enter the Bow menu, and disable the symmetric slider.
2.
There are now two vectors on each side of the picture that can be adjusted individually. Select each of them,
and adjust angle and linearity (length) individually to obtain the correct correction.
The angle is adjusted by the up and down arrows on the remote control, and the linearity is adjusted by the left
and right arrows
Summary of Contents for F70 - 4K6
