![Barco F70 - 4K6 User Manual Download Page 51](http://html1.mh-extra.com/html/barco/f70-4k6/f70-4k6_user-manual_474063051.webp)
601
–
426-03
F70 Series
51
CAUTION:
Always use a Rigging Frame when the projector shall be mounted in other ways than on
the feet, on a flat surface.
The threaded hole in the lower back end of the projector is NOT suitable for lifting or other heavy
operations. Only for adjustment purposes.
Installation and use of the Rigging Frame are described in document R5906768 Multifunctional
Frame
—
Installation Manual.
Mounting on a flat surface
1.
Position the projector at the desired location.
2.
Power up the projector.
3.
Go to
Main Menu / Test Pattern
s and select an internal hatch pattern to display on the screen.
4.
Adjust the projector legs until the projected hatch pattern is a level and perfect rectangle.
Adjustable feet
Twisting the adjustable feet in either direction, left or right, allows you to fine-adjust the projector position for
precise vertical mechanical alignment.
Raise
Lower
Image 4-2
Mounting to a ceiling
1.
Install the projector in to an approved rigging frame.
2.
Install the rigging frame to the desired location.
3.
Power up the projector.
4.
Go to
Main Menu / Installation / Orientation
and select the correct orientation for your setup.
5.
Go to
Main Menu / Test Pattern
s and select an internal hatch pattern to display on the screen.
6.
Adjust the position (height and angle) of the rigging frame until the projected hatch pattern is a level and
perfect rectangle.
If applied in a motion rig, care must be taken to stay within the environmental specifications for
vibration and shock. It may also be necessary to use additional, custom means to stabilize the
projection lens to make sure that the projected image remains in position and properly focused.
Summary of Contents for F70 - 4K6
