601
–
426-03
F70 Series
44
Install a lens
1.
Verify that the projector shutter is activated (shutter is activated when the shutter icon on the projector keypad
is red).
2.
Verify that the lens release lever is in its default position at the far left of the slide, as illustrated.
3.
Remove the protective cap at the lens bayonet end
4.
Align the lens so that the red marking on the bayonet is facing upwards.
5.
Position the lens bayonet into the projector lens mount and support in place with one hand.
6.
Slide the lens lever to the far right.
7.
Verify that the lens is firmly in place before removing your hand from the lens.
Image 3-4
Remove a lens
1.
Support the lens with one hand.
2.
Use the other hand to slide the lens release lever to the far left position.
3.
Pull the lens straight out of the projector lens mount.
4.
Replace with another lens, or install the projector lens cap.
Image 3-5
3.4 Lens shift
General
Use the Remote control or the keypad on the Projector to adjust the lens shift mechanism.
The lenses can be shifted vertically and horizontally to facilitate precise image positioning in single and
multiple projector systems. The projector allows for horizontal and vertical shift in both directions. Always
place the projector perpendicular to the screen, and use the lens shift to align the picture.
If not possible to align the projector perpendicular to the screen, due to environmemt of other, see chapter
”
, page 95
When EN 68 lens is installed in the projector, there are some limitations in the lens shift range, in
order to avoid damage to the lens.
This limitation will be identified as an reduction in the output light from the projector when the shift
position exceeds the defined range. The output light will then be reduced to 20% of max.
Summary of Contents for F70 - 4K6
