Barco F70 - 4K6, User Manual

Page: 52 / 136

601 – 426-03 F70 Series 52
4.6 Projector safe attachment points
About
Due to use of a Rigging Frame or other equipment, the projector has some defines anchor points that shall be
used. See the illustration below.
Note that there is only this 4 selected attachment points that is approved as anchor points for the unit.
Anchorpoints.
For attaching to rigging frame or similar.
1
Image 4-3
Item Thread Dimension
Max Hole Depth Application
1 M6 15mm Anchorpoint / Ceiling / Rig
Mount
4.7 Throw distance
Calculate the installation throw distance
Throw is the distance (D) measured from your projector lens to the screen. To calculate the throw distance for
an installation, you will need two pieces of data: the selected lens throw ratio (L) and the horizontal width (W)
of the screen. For example, if the screen width (W) is 2.4 meters and the projector lens has a throw ratio (L) of
0.99:1, then the throw distance (D) will be 2.38 meters.
Calculation: 2.4 x 0.99 = 2.38
Physical Installation