Barco DP2K SLP Series, Service Manual

Page: 123 / 410

R5906848 /04 DP2K SLP Series 123
Required tools
• Compressed air.
• Clean Toraysee® cloth or any micro fiber lens cleaning cloth.
• Clean cotton cloth.
• Cotton gloves (never use gloves that leave particles on the surfaces).
Required parts
Lens cleaner (e.g. Carl Zeiss lens cleaner or Purasol® or any waterbased lens cleaner)
How to clean the Light Pipe lenses?
1. Blow off dust with clean compressed air (or pressurized air cans).
Tip: Wear cotton gloves to handle the Light Pipe lenses.
2. Clean with lens cleaner together with a clean lens cleaning cloth to remove the dust and contamination. Use
big wipes.
3. Use a dry lens cleaning cloth to remove left liquid or stripes. Polish with small circles.
4. If there are still fingerprints on the surface, wipe them off with lens cleaner together with a clean lens cleaning
cloth. Polish again with a dry one.
10.9 Installing the Light Pipe cover plate
Required tools
2.5mm Allen wrench.
How to install the cover plate of the Light Pipe?
1. Place the cover plate on the Light Pipe housing.
2. Fasten the cover plate with 10 screws (reference 1 Image 10-14) as illustrated. Use a 2.5mm Allen wrench.
1
Image 10-14
10.10 Installing the Light Pipe
Required tools
3mm Allen wrench.
Light Pipe