![background image](http://html1.mh-extra.com/html/barco/cx-20/cx-20_installation-manual_3854898092.webp)
R5900102 /02
CX-20
92
Image 6
–
39 Firmware update
About automatic firmware updates
There are 3 ways to configure automatic updates:
•
Automatic: The system will automatically detect firmware updates and install them for you when it
’
s not in
use.
•
Notify: The system will automatically detect firmware updates and notify you on the web interface
dashboard and firmware page. The update can then be initiated via the
Support & Updates
>
Firmware
page
•
Off: The system will not detect firmware updates and will not notify you.
Manual firmware update
1.
Download the latest version of the firmware from Barco's website.
2.
Log in to the
Configurator
.
3.
Click
Support & Updates
→
Firmware
.
4.
To upload a firmware version, click on
Upload firmware..
.
A browser window opens.
5.
Browse to the file with the new firmware and click
Open
to start the upload.
Note:
This should be an .enc file. You might have to unzip the file downloaded from Barco's website.
Note:
Updating the software to the Base Unit takes several minutes. Progress can be followed on the
meeting room display.
The Base Unit software is updated.
If a firmware downgrade is required on the Base Unit, check the check box in front of
Allow firmware
downgrade
.
Firmware update without using the Configurator
Next to using the configurator to upgrade the firmware, the following ways are also possible:
•
When your device is connected to a network and managed via the XMS (Cloud) management platform, the
firmware can be upgrade via this Management solution. For more information on upgrading firmware in this
Summary of Contents for CX-20
