![background image](http://html1.mh-extra.com/html/barco/cx-20/cx-20_installation-manual_3854898025.webp)
25
R5900102 /02
CX-20
3
Status LED ring
4
Standby Button
USB ports
Both USB ports, one USB Type-C
TM
and one USB Type-A, are used to connect a USB camera or USB echo-
cancelling speakerphone to the Base Unit. Additionally these ports are also used to pair the Buttons or update
the software when both are not done via XMS.
When plugging in the Button into the Base Unit, the Button is paired to the Base Unit. The Base Unit checks
whether the software and firmware of the Button is up to date. If not, the Base Unit updates the software and/
or firmware.
The use of a convertor is sometimes necessary to connect to one of these ports.
Status LED ring
The color of the LED ring around the power button of the Base Unit give information on the status of the
system.
LEDs behavior
Explanation
static red
•
receiving content from the Button and streaming towards the
display.
•
during the first phase of the Base Unit boot process.
blinking white
•
system is starting up (during the second phase)
•
Button pairing is in progress
•
software update of the Base Unit
breathing white
•
ECO standby mode
static white
•
awake and ready (i.e. showing the welcome message on the
display)
•
pairing and software update of the Button is done, you can now
unplug the Button from the Base Unit..
red blinking
•
an error occurred
dark
•
deep standby/off
Back layout of the Base Unit
The connection panel is situated at the back of the Base Unit.
1
2
3
4
Image 2
–
3
1
Power connection
2
HDMI out
3
LAN Ethernet connection
4
Kensington lock
Summary of Contents for CX-20
