Barco Coronis MDCC 2121, Getting Started Manual

Page: 67 / 75

General tips
67
danger that colors will change when focus moves among different
applications.
However, if you are using the
Color to Gray Compatibility
palette mode,
the color setting for your high-resolution grayscale displays should
default to True Color (32 bits per pixel). Even though this palette mode
supports 32 bit True Color, Barco recommends that when using a using a
color display in conjunction with your high-resolution grayscale
display(s) that you still set the
color display
as the
primary
monitor of
the Windows desktop.
Setting the resolution of your B
ARCO
C
ORONIS
Display
Note:
In order to set the resolution of your B
ARCO
C
ORONIS
Display
you must be logged in using an account with administrator
privileges.
1.
Open the “
Windows Display Control Panel
” by one of the two
methods below:
a)
Start > Settings > Control Panel > Display
or
b)
Open the
“Display Properties Control Panel”
by right
clicking in an empty area on the desktop, then select
Properties
.
2.
Click on the
Settings
tab.
3.
Select the
rectangle
that represents the Barco Coronis display
whose settings you wish to change.
Note:
If you are using the VGA capabilities of your Coronis
display controller, the resolution for the first display may be set to
a VGA resolution of
“640 x 480”
pixels with 16 colors and a default
refresh rate. If your Coronis controller is not running VGA, the
display may not be enabled yet. To enable the display, check the
“Extend my Windows desktop onto this monitor” checkbox
, but
do
NOT
click the
Apply
button at this time.