Barco Coronis MDCC 2121, Getting Started Manual

Page: 44 / 75

Cable routing
44
Cable routing
To route the cables:
Figure 23: Display rear view
1.
Bind the cables in the connector compartment together with the
cable tie inside the connector compartment.
2.
Route the cables alongside the neck and in the cable ducts in the
tilt & swivel foot. See figure 23 above.
3.
Re-attach the connector compartment cover and neck cover. Close
the cable duct covers. Push the cable duct covers upward to lock
them.
To route the cables:
1.
Bind the cables in the connector compartments together with the
cable ties inside the connector compartments.
2.
Re-attach the connector compartment covers.
3.
Unpack the plastic stand arm covers and attach them to the
display stand.