![background image](http://html1.mh-extra.com/html/barco/coronis-mdcc-2121/coronis-mdcc-2121_getting-started-manual_4034454032.webp)
Installing your Barco display controller
32
11.
Reconnect any cables you have disconnected and plug in the
computer’s power cord.
12.
Turn on the display(s) and then your computer.
Turning on your system
If you have properly installed your graphics card, the Windows
start-up messages will appear once the boot procedure is finished.
13.
Install the drivers, QAWeb software and documentation for your
B
ARCO
C
ORONIS
Display System by following the instructions in the
section
“Installing drivers and software”
on page 50 of this
manual.
WARNING
- Turn on your display(s) before you turn on
your computer. Failure to do so could damage your dis-
play(s).
Your Barco display(s) will be running in a basic video
mode at a default refresh rate. Higher resolutions and
refresh rates, such as 1536x2048@60Hz, are not avail-
able at this stage of the installation. Once you have
installed the B
ARCO
C
ORONIS
Display System drivers and
software, the Barco monitor Plug and Play software
should automatically set the resolution for the displays
of your B
ARCO
C
ORONIS
Display.
Summary of Contents for Coronis MDCC 2121
