Baoli CPD10 Operation & Service Manual Download

Page: 67 / 124

e) Press the pedal slowly until START lamp lights, save it.

f) Select MINIMUM menu, press the pedal slowly until output value is larger than start

value, save it.

g) Select MAXIMUM menu, press the pedal slowly until the max output value occurs, save

it.

h) Get out of menu.

4.6 LED instrument (DC)

The electric forklift truck adopts newly displaying with combination of LED and LCD.

Control circuit adopts micro computer technology, sampling, displaying and controlling in

real-time. The intense and feeble circuit in the instrument adopts light-electricity

separating with control relay. It has under-voltage warning and high automatic supporting

function. Refer to Fig4-9.

4.6.1 Outline and instructions of instrument

Fig4-9 LED instrument

Summary of Contents for CPD10





























































































































Search results

Summary of Contents for CPD10

Reviews:

Related manuals for CPD10

Brands by name

Popular brands

Baoli CPD10, Operation & Service Manual

Search results

Summary of Contents for CPD10

Reviews:

Related manuals for CPD10

Brands by name

Popular brands