Baoli CPD10 Operation & Service Manual Download

Page: 3 / 124

PREFACE

Balance weight type electric forklift trucks are designed on the base of the advanced

features available from both local and foreign designs. These trucks are suitable to

handle, transport and stack goods in factories, mines, stations, ports, freight yards,

warehouses and used widely in food processing, textiles and other light industries. The

use of forklift trucks fitted with kinds of attachments will become extensive.

These forklift trucks feature a wide-vision mast system, full powered steering unit,

self-boost brake, stepless speed control, open type overhead guard and high quality

motor, battery, multifunction integration electric controller and large-screen combination

meter, so they have a lot of advantages such as good performance, easy operation, wide

vision, flexible steering, reliable braking, powerful and smooth power, low noise, no

pollution and beautiful appearance.

Newly designed AC system can control the torque intelligently, the standard soft

provides a complete toolkit to meet the demands of users, and it optimizes the operation

and reduces the producing cost of trucks. It adopts imported motors and electric

controllers, improving the reliability of trucks and making the performance more superior.

The combination meter based on User Interface makes the operation more easily and

conveniently.

This manual states the forklift truck’s specifications, operation, maintenance, main

assemblies’ constructions and working principles so as to help operators to use the trucks

correctly and attain the highest functions. It is necessary to read over the manual before

operating or maintaining the forklift trucks. The rules and notices in this manual should be

abided seriously by all of relative personnel to enable these trucks in optimized working

state for long period and bring the highest efficiency.

The partial content in this manual might not correspond with the actual condition

because of technical improvement. Our products are subject to improvements and

changes without notice.

Summary of Contents for CPD10





























































































































Search results

Summary of Contents for CPD10

Reviews:

Related manuals for CPD10

Brands by name

Popular brands

Baoli CPD10, Operation & Service Manual

Search results

Summary of Contents for CPD10

Reviews:

Related manuals for CPD10

Brands by name

Popular brands