Banner DXMR90-X1 Series, Instruction Manual

Page: 5 / 55

May 09, 2023
DXMR90-X1 Series Controller Instruction Manual
5
•
•
•
•
•
•
•
•
DXMR90-X1 Models ............................................................................................................................................................................................ 6
Hardware Overview ............................................................................................................................................................................................ 7
Automation Procotols ......................................................................................................................................................................................... 7
Modbus Overview ............................................................................................................................................................................................... 8
Modbus Registers .............................................................................................................................................................................................. 8
Dimensions ......................................................................................................................................................................................................... 9
Banner's DXMR90-X1 Series Controller consolidates data from multiple sources to provide local data processing as well as
accessibility for host systems as a platform for the Industrial Internet of Things (IIoT).
The DXMR90-X1 contains four individual Modbus masters allowing for concurrent communication to up to four independent
networks. Data is collected into the internal logic controller to facilitate edge processing, protocol conversion to Industrial Eth-
ernet, and pushing information to web servers.
Overview of the DXMR90-X1 Series Controller
Configurable
Modbus Port 0
(female)
Modbus Master
Ports 1-4
(female)
Configurable
Modbus Port 0
and Power (male)
D-coded Ethernet
(female)
One male M12 connection provides common power and ground to all M12 Modbus ports. The two-port 0 Modbus connec-
tions can be configured as pass-through wiring to connect to a Modbus trunk. One 100 Mbps Ethernet port (female) using an
M12 D-coded Ethernet connection.
Modbus TCP
EtherNet/IP
Profinet
Configuration/discovery port
Four Modbus master connections using female M12 connectors.
2-wire RS-485 physical transceiver with power/ground at each connector
Separate Modbus master control and programmability for each connection point
Independent and selectable baud rate and parity settings
Individual timing and packet timing for each Modbus connection
Overview of the DXMR90-X1
Chapter 1
© Banner Engineering Corp.