Banner DXMR90-X1 Series, Instruction Manual

Page: 38 / 55

May 09, 2023
DXMR90-X1 Series Controller Instruction Manual
38
Slots and Modules for DXM PROFINET
There are ten slots to accommodate the DXM Controller data.
Slots for input and output values
Values Maximum Data Size
Input values 1440 bytes
Output values 1440 bytes
Slot 1 - Input (DXM --> PLC)
Module ID Submodule ID Module Size (bytes) Register Start Register End Direction
0x44 0x01
Banner IO-Link
Master Info
9
1 3
Input 6 6
123 123
It is important to note that the module placed in slot 2 corresponds to Port 1; the module placed in slot 3 corresponds to Port
2; the module placed in slot 4 corresponds to port 3. etc.
For the DXMR90-4K IO-Link Master device, slots 6 through 9 are unused.
If the IO-Link In/Out process data modules (all except digital input and output) are used, the attached IO-Link device must
have PDI and PDO size less than or equal to the number of data bytes allowed in the module. Data transfers will not be ap-
plied otherwise. For example, plugging in the 16/16 byte module to a slot corresponding to a device that has 22 bytes of PDO
results in an error. Process data sent from the PLC to DXM will not be applied.
Slots 2-9 (1 per IO-link port)
Module ID Submodule ID Module
Size
(bytes)
Register Start Register End Direction
0x45 0x01 IO-Link In/Out 32/32 Byte + Status
36
x001 x017
Bidirectional
x506 x507
46
x051 x067
x851 x859
0x46 0x01 IO-Link In/Out 16/16 Byte + Status
20
x001 x009
Bidirectional
x506 x507
30
x051 x059
x851 x859
0x47 0x01 IO-Link In/Out 8/8 Byte + Status 12 x001 x005 Bidirectional
Continued on page 39
◦
◦
◦
Status indicator bar
If the Application Status indicator is red, close and restart the DXM Configuration Tool, unplug and re-plug in
the cable and reconnect the DXM to the software.
If the Application Status indicator is green, the file upload is complete.
If the Application Status indicator is gray and the green status bar is in motion, the file transfer is in progress.
After the file transfer is complete, the device reboots and begins running the new configuration.
© Banner Engineering Corp.